Oregon Replacement Rim Sprockets For ChainSaws. .325 PITCH - 8 TOOTH
Standard Splined Rims have a sprocket bore of approximately 7/8".
Please have saw model and sprocket type available when ordering.
Choose From:
Part #
|
Description
|
387
|
3/8" pitch - 7 Tooth
|
388
|
3/8" pitch - 8 Tooth |
3257
|
.325 pitch - 7 Tooth
|
3258
|
.325 pitch - 8 Tooth |
4047
|
.404 pitch - 7 Tooth
|
| 4048 |
.404 pitch - 8 Tooth
|
Comstock Logging Supplies stresses the importance of regular maintenance. This does not stop at the sprocket; a misused sprocket will cause patterns of chain wear which can damage the guide bar and reduce the life of chain, bar, and sprocket. Proper maintenance includes:
• Proper chain tension; loose chain tension is a leading cause of sprocket problems.
• Clean all build-up from splined hub so the rim can float freely.
• Never run an old chain on a new sprocket.
• Apply grease to the clutch drum’s bearings each time the sprocket is removed.
