Comstock Logging LS, Inc.
0 item(s) in cart/Total: $0
!!! INVENTORY REDUCTION SALE !!!
**USED EQUIPMENT**
CLEARANCE ITEMS
Aervoe Tree Paint
Ancra Straps & Parts
Ballantine Hot Saw Teeth
Bell Bars & Sprockets
Cable Products & Accs.
Carlton Products
Chain Saw Files & Handles
Clevis Domestic & Import
Comstock Hats & Shirts
Comstock Pro Series
CSI Bars & Parts
Danzco Pin Sprockets
Diamond Saw Works Inc.
Firestone Forestry Special Tires & Tubes
Felling Wedges
Firewood Processor Bars
Fiskars Axes
Forester Products
Forestry Supplies
GB American Products
Hard Hats & Parts
Head Saw Grinders & Parts
Jonsered Leaf Blowers
Jonsered Saws & Parts
Kinco Gloves
Labonville Products
Loader Chains
Logging Hardware
Log Rules & Cruising Sticks
Logrite Tools
Maint. Bars & Chains
Nelson Tree Paint
Oil Products
Oregon Breakers / Spinners & Parts
Oregon Grinders & Parts
Oregon Forestry Products
**Oregon Harvester Products**
Peavey Manufacturing Co
Safety Boots & Liners
Safety Road Signs
Sawbuck Bars & Parts
Sawmill Supplies
Simonds Bits & Shanks
Skidder Chain Tighteners
Slasher Saws & Parts
Spencer & Windsor Tapes
Trygg Skidder Chains
Truck Chains & Parts
Tsumura Bars & Tips
Winch Bands & Parts
$0 - $24.99
$25 - $49.99
Over $50




Home > Oregon Forestry Products > + Oregon Saw Chain Single Loops
90PX052G - OREGON ADVANCECUT CHAINSAW CHAIN NARROW-KERF 3/8" PITCH .043 GAUGE 52 - DRIVERS
90PX052G - OREGON ADVANCECUT CHAINSAW CHAIN NARROW-KERF 3/8' PITCH .043 GAUGE 52 - DRIVERS
Share |

90PX052G - OREGON ADVANCECUT CHAINSAW CHAIN NARROW-KERF 3/8" PITCH .043 GAUGE 52 - DRIVERS

Part Number 90PX052G
Your Price:
$13.00
Quantity Pricing
Quantity
Price
10 - 29  
$12.00  
30+  
$11.50  
Quantity
Add to Wish List Add to Wish List
Description
90PX  chain is part of a Micro-Lite™ narrow-kerf cutting system that requires less power from the saw to cut than standard cutting systems.
90PX - OREGON SAW CHAIN 3/8" PITCH .043 GAUGE 44 TO 56 DRIVERS *VOLUME DISCOUNTS AS LOW AS $11.00*
Oregon® Micro-Lite™ 90PX  is made for small saws and features a chamfer-chisel cutter design that outcuts competitive chains. 90PX cuts a narrow kerf, requiring less power from the saw than standard chains to make the same cut. Micro-Lite™ 90PX is a low-vibration/low-kickback chain which meets both the ANSI (U.S.) and CSA (Canadian) low-kickback requirements. This chain is ideal for homeowners or consumer users, and is  equally well suited for commercial cutters such as arborists and orchardists. Micro-Lite™ 90PX  is designed for use on electric saws with bars up to 16 inches (41cm), and on small  gasoline-powered aws up to 2.5 cubic inches (41cc) with bars up to 14 inches (35cm). 90PX044G  is compatible with all existing 91-type drive sprockets, and its narrow .043-inch gauge requires the use of a Micro-Lite™ bar.
  • 90PX044G  is a low-kickback chain
  • Low-vibration chamfer-chisel cutters have an angular shape with twin cutting corners for excellent performance and edge-holding durability
  • Narrow .043" gauge helps reduce the weight of the bar-chain combination approximately 15%
  • Always install 90PX044G chains on a .043" gauge Micro-Lite™ bar (MLE part numbers) to obtain all the advantages of the Micro-Lite™ system. 90PX044G  chain does not fit .050" gauge bars intended for 91-series chains
  • Top-plate witness mark makes accurate sharpening easier
  • LubriLink™ tie straps help keep oil where it's needed - on the chain
  • Vibe-Ban™ chassis design reduces vibration 25% or more at the chainsaw's handles
  • LubriWell™ oil holes help carry oil around the full length of the guide bar's groove


ATTENTION: This saw chain is low kickback chain. It met the reduced kickback requirements of ANSI B175.1 when tested on a representative sample of chain saws. Its safety features significantly reduce the hazard of kickback while maintaining high cutting performance. ALL CUTTING CHAINS CAN KICK BACK, which may result in severe personal injury to the chain saw operator or bystanders. Operate your chain saw safely. Read all warnings in your chain saw operator's manual.  ATTENTION: This saw chain is low kickback chain. It met the reduced kickback requirements of ANSI B175.1 when tested on a representative sample of chain saws. Its safety features significantly reduce the hazard of kickback while maintaining high cutting performance. ALL CUTTING CHAINS CAN KICK BACK, which may result in severe personal injury to the chain saw operator or bystanders. Operate your chain saw safely. Read all warnings in your chain saw operator's manual. 
Related Items
COMHS - COMSTOCK LOGGING HOODED SWEATSHIRT
COMHS - COMSTOCK LOGGING HOODED SWEATSHIRT
Your Price: $40.00
TS524 - TIMBER SAVAGE ALL-WEATHER 5-1/2
TS524 - TIMBER SAVAGE ALL-WEATHER 5-1/2" PLASTIC WEDGE PLAIN SHIPPING INCLUDED (24)
Your Price: $72.00
515982201 - JONESRED CHOKE LEVER CS2171/72
515982201 - JONESRED CHOKE LEVER CS2171/72
Your Price: $3.00
TIMBER MASTER PRO-CUT BANDS 1-1/4
TIMBER MASTER PRO-CUT BANDS 1-1/4" X 11' .042 GA X 7/8" TOOTH SPACING
Your Price: $19.00
34FT - 3/4
34FT - 3/4" TRYGG FORGED CLEVIS
Your Price: $7.50
34FT25 TRYGG FORGED CLEVIS *IMPORTED* 25 PER BOX
34FT25 TRYGG FORGED CLEVIS *IMPORTED* 25 PER BOX
Your Price: $187.50
  
Browse Similar Items