95VPXPD - OREGON SPEEDCUT CHAINSAW CHAIN MICRO-CHISEL .325 PITCH .050 GAUGE -PER DRIVER

Share |

95VPXPD - OREGON SPEEDCUT CHAINSAW CHAIN MICRO-CHISEL .325 PITCH .050 GAUGE -PER DRIVER

Part Number 95VPXPD

Your Price:

$0.26

Quantity

Add to Wish List

Description

OREGON SPEEDCUT CHAINSAW CHAIN .325 PITCH .050 GAUGE -PER DRIVER LINK
Micro-Chisel® cutters feature small-radius working corners for excellent performance and easy sharpening.

Always install 95VPX chain on a Micro-Lite™ bar (ML or MP part numbers) to obtain all the advantages built into the Micro-Lite™ system.

LubriLink™ tie straps help keep oil where it's needed - on the chain and LubriWell™ oil holes help carry oil around the full length of the guide bar's groove.

Vibe-Ban™ chassis design reduces vibration 25% or more at the handles.

95VPX chain is intended for use with gasoline-powered saws from 2.2 - 2.8 cu. in. (38-62cc) with bars up to 13" - 20" (33-50cm).

OREGON® 95VPX chain is a blue-label chain; it meets the low-kick-back performance requirements of ANSI B175.1 (US), and CSA Z62 (Canada) when tested with OREGON® Micro-Light™ bars.

OREGON® 95VPX chain is a blue-label chain; it meets the low-kick-back performance requirements of ANSI B175.1 (US), and CSA Z62 (Canada) when tested with OREGON® Micro-Light™ bars.

Priced per Drive Link

ATTENTION: This saw chain is low kickback chain. It met the reduced kickback requirements of ANSI B175.1 when tested on a representative sample of chain saws. Its safety features significantly reduce the hazard of kickback while maintaining high cutting performance. ALL CUTTING CHAINS CAN KICK BACK, which may result in severe personal injury to the chain saw operator or bystanders. Operate your chain saw safely. Read all warnings in your chain saw operator's manual.